James Walker FS SEALS

FS SEALS – Walle sealing  

Elastomeric seals & componentsfor the Oil & Gas industry

This design is essentially

a hybrid of the Springsele

and P-Seal. The most

common applications are

replacements for P-Seals

as casing and hanger seals on

wellheads.

The combination of design, materials

and construction ensures that highperformance

FS seals retain their sealing

integrity under adverse conditions,

including:

 Stab-in operations.

 Wide ranges of temperature and

pressure.

 Chemically aggressive and highly

abrasive oilfield media.

This seal can be retrofitted to many

conventional P-Seal housings with minor

modifications to the ports. It offers

reductions in installation time without the

need for pack-off operations.

Our FS Casing and Tubing Seal has

been validated on rough casings in DNV

witnessed tests to API 6A Appendix F, PR2

procedures at 69MPa (10,000psi) and

–18°C to +121°C (0°F to +250°F).

Full temperature capability is –29°C to

+177°C (–20°F to +350°F) depending on

size, pressure and material.

The FS Seal is supplied to suit standard

API casings from 2 to 30 inches

diameter.