James walker FS Casing & Tubing Seal

James walker FSCasing & Tubing Seal  

This design is essentially ahybrid of the Springsele and P-Seal. The most common applications are replacementsfor P-Seals as casing and hanger seals on wellheads.

The combination of design, materials and constructionensures that highperformance

FS seals retain their sealing integrity under adverseconditions, including:  Stab-in operations.  Wideranges of temperature and pressure.  Chemically aggressiveand highly abrasive oilfield media.

This seal can be retrofitted to many conventional P-Sealhousings with minor modifications to the ports. It offers reductions ininstallation time without the need for pack-off operations.

Our FS Casing and Tubing Seal has been validated on roughcasings in DNV witnessed tests to API 6A Appendix F, PR2 procedures at 69MPa(10,000psi) and –18°C to +121°C (0°F to +250°F). Full temperature capability is–29°C to +177°C (–20°F to +350°F) depending on size, pressure and material.

The FS Seal is supplied to suit standard API casings from2 ?÷? to 30 inches diameter.

Elast-O-Lion? 101  and Elast-O-Lion? 985

J.W. Drawing

JW101-02875 JW985-02875

JW101-03500 JW985-03500

JW101-04000 JW985-04000

JW101-04500 JW985-04500

JW101-04750 JW985-04750 4

JW101-05000 JW985-05000

JW101-05500 JW985-05500

JW101-05750 JW985-05750 

JW101-06000 JW985-06000

JW101-06625 JW985-06625

JW101-07000 JW985-07000

JW101-07625 JW985-07625

JW101-07750 JW985-07750

JW101-08625 JW985-08625

JW101-09000 JW985-09000

JW101-09625 JW985-09625

JW101-09875 JW985-09875

JW101-10750 JW985-10750

JW101-11750 JW985-11750

JW101-11875 JW985-11875

JW101-13375 JW985-13375

JW101-13625 JW985-13625

JW101-14000 JW985-14000

JW101-16000 JW985-16000

JW101-18625 JW985-18625

JW101-20000 JW985-20000

JW101-24000 JW985-24000

JW101-30000 JW985-30000